Wire harness/power distro is all home made. This quad is a pretty standard build with commonly used components.Īfro 30A ESC Sunnysky 2212 980kv W/10" props My second board from hobbyking did come with a cable but it has the wrong connector to plug into the apm port so I'm still using the same first original ebay cable with the second minim board. How does the minim board react if the telem port gets disconnected while in use? I'm wondering if it is intermittently losing connection. the connector didnt seem to fit perfectly in the telem port on the apm but It was working so I used it. I'm thinking now after seeing that it is either a voltage sag problem or interferance but what exactly is it effecting? Other thing I was thinking and hope someone can confirm is that when i got my first minim board i didnt come with cables so i ordered a ebay one. So I landed and rebooted the quad the display was back and tryed another flight right away I gave it a pretty good bump of throttle to get some altitude quickly and right as i did the display cut out.
Mini minim osd full#
Like I said I assumed it was a faulty board so I ordered a second board (both were the v1.1 boards from HK) With the second board I did manage to do 2 full fpv flights with no issues but last night I took it out and about 4min into the flight I lost the overlay after some spirited flying. If I reboot the system(unplug the battery and plug it back in) the minim boots up normaly and seems to work till I take off and then will randomly cut out again at a random time. Also if i just put it in loiter and let it chill out the display will stay.
I only seem to lose the overlay with aggressive flying if I just plug the quad in and let it sit on the ground in with the props spinning it wont cut out. I assumed a faulty Minim Board but ordered a second one that is also exhibiting the same issues. The Minim OSD has never worked properly for me at all and this issue I get is that I lose the overlay during flight but the video feed stays unnaffected. I have searched pretty extensively online and can't find anybody with similiar issues. Power board via 5V DC.Hopeing someone can offer some insight in what is going on as it is really making me not want to fly this model. Note: Make sure to plug the cable in correctly as this is not keyed so will go in either way.Īll the same features as the original, around 1/3 of the size. To Program this OSD and to flash the firmware you will need an FTDI to USB converter.
Mini minim osd software#
This can be flashed with a variety of different software but as stock come loaded with the Kv_Mod firmware. The micro miniM OSD will display the voltage of 2 battery packs up to 4S, a current sensor and either a digital or analogue pwm rssi signal.
Mini minim osd serial#
The new osd has been developed to allow for more firmware options this is now compatible with the clean flight flight controllers, this makes it ideal for mounting on your mini race quad or any other system that uses either a Mavlink or Multiwii serial connection. It has the same features as its older brother but without the DC-DC power converter which means it must be provided with a 5v power source. The Micro MiniM OSD for the Naze32 board is based off of the original MiniM OSD and is basically the same thing just in a smaller package (1/3 of the size).
0 kommentar(er)
